Long-Term Debt Disclosures and Ratios: A Simple Guide

Long-term debt disclosures and solvency ratios guide by Farhat Lectures

Long-term debt disclosures are the financial statement notes that explain a company’s borrowings: interest rates, maturity dates, collateral, covenants, and call or conversion features. Under U.S. GAAP (generally accepted accounting principles), companies must disclose the principal due in each of the next five years. Read these notes alongside debt to assets and times interest earned to judge financing risk.

A debt total alone can’t show when cash is due or whether lenders can demand earlier repayment. This guide connects debt classification, the debt notes, and two basic solvency ratios. All numbers are hypothetical and follow U.S. GAAP.

On the CPA exam, debt classification and disclosures are FAR topics, and ratio interpretation also shows up in BAR. CMA candidates see solvency ratios like times interest earned in Part 2.

Watch: Solvency Ratios Explained

This lesson explains solvency ratios. Watch it before the ratio sections below, or come back to it after you work through Vista’s numbers.

Watch this Farhat lesson on YouTube

How is the current portion of long-term debt classified?

On a classified balance sheet, debt principal due within the next year, or the operating cycle if longer, generally belongs in current liabilities. The portion due later remains noncurrent. Moving a maturity into the current section does not create a new expense or change total liabilities.

Assume Vista Supply has a $900,000 note, with $150,000 due during the next year and $750,000 due later. If no exception applies, report $150,000 as the current portion of long-term debt and $750,000 as noncurrent debt.

Specific exceptions can apply, including qualifying long-term refinancing arrangements or repayment from designated noncurrent resources. Each exception has specific conditions. A plan to refinance isn’t enough on its own. The company also needs evidence that it can actually do it, such as a qualifying financing agreement. Covenant violations and creditor waivers may also affect classification.

Exam trap: what happens after a covenant violation?

Suppose Vista breaks a working capital covenant at year-end, and the loan agreement lets the lender demand immediate repayment. Unless the lender waives that right for more than one year from the balance sheet date (or the operating cycle, if longer), or it’s probable Vista will cure the violation within a grace period, Vista reports the entire $900,000 as current.

Total debt stays at $900,000. Only the classification changes.

Exam trap: refinancing after year-end

Now suppose there’s no violation. After year-end, but before the financial statements are issued, Vista signs a qualifying noncancelable agreement to refinance $100,000 of its $150,000 current maturity on a long-term basis.

Vista can report that $100,000 as noncurrent. The other $50,000 stays current, because a company can exclude only the amount covered by the agreement.

For the underlying instrument, see long-term notes payable. Do not confuse a note’s original ten-year term with the remaining period until its next required payment.

What must long-term debt disclosures include?

Useful notes identify the debt’s nature and carrying amount, interest rates, maturities, call provisions, conversion features, collateral, and significant restrictions. A covenant is a contractual requirement, such as maintaining specified working capital or limiting additional borrowing. A sinking fund requires resources to be set aside for repayment.

What each long-term debt disclosure tells you
DisclosureStudent question it answers
Maturity scheduleWhen must principal be repaid?
Interest rates and payment termsWhat recurring financing cash payments are required?
CollateralWhich assets secure the obligation?
Call or conversion termsCan repayment or settlement occur differently?
Covenants and violationsWhat restrictions or acceleration risks exist?
Relevant fair-value informationHow does market value differ from the reported amount?

Pledging an asset does not normally remove it from the balance sheet. The company reports the asset and discloses the security arrangement. A debt balance should not be netted against collateral merely because the lender has a claim on it.

Fair-value disclosure and fair-value measurement are different. A company may disclose debt fair value while continuing to measure it at amortized cost. The fair value option guide addresses elected remeasurement. So who has to disclose it? Public business entities disclose the fair value of debt measured at amortized cost, using an exit price, and state its fair value hierarchy level. Level 1 uses quoted prices, and Level 3 relies on inputs that can’t be observed in a market. Since ASU 2016-01, private companies and other entities that are not public business entities are not required to make this disclosure.

Example: how to read a five-year debt maturity schedule

The Financial Accounting Standards Board (FASB) sets this rule in ASC 470-10-50-1 (paragraph text as shown in ASU 2020-06): a company must disclose the combined total of debt maturities and sinking fund requirements for each of the five years following the latest balance sheet date. This requirement is distinct from the former Securities and Exchange Commission contractual-obligations table format.

Vista’s hypothetical $900,000 principal balance has this schedule. There are no discounts, premiums, or issuance costs in this example.

Vista Supply: five-year principal maturity schedule (hypothetical)
Payment periodPrincipal due
Year 1$150,000
Year 2120,000
Year 3130,000
Year 4100,000
Year 5200,000
Thereafter200,000
Total$900,000

The first year supports the $150,000 current classification. The next four years and thereafter total $750,000. Interest is not included in this principal schedule. If carrying amount includes a discount or other adjustment, contractual principal totals may require reconciliation to the balance sheet.

What a long-term debt note can look like

Here’s a simplified, hypothetical note for Vista Supply, so you can see how the pieces fit together.

Note 8: Long-Term Debt. Vista Supply has a $900,000 note payable to a regional bank. The note carries a fixed 6% interest rate, with interest paid quarterly, and is secured by Vista’s warehouse equipment. The loan agreement requires Vista to keep working capital of at least $400,000 and limits new borrowing without the bank’s consent. Vista was in compliance with these covenants at year-end. Principal maturities for the next five years are shown in the schedule above.

Notice what each sentence answers: who the lender is, what the debt costs, what secures it, what restrictions apply, and when cash goes out. At 6% on $900,000, a full year of interest on this note is $54,000. Vista’s other borrowings make up the rest of the $120,000 interest expense used later in this guide.

If Vista were a public business entity, the note would also disclose the debt’s fair value.

How do you calculate the debt to assets ratio?

Debt to assets = total liabilities ÷ total assets. In this guide, the numerator includes both current and noncurrent liabilities, including operating liabilities such as accounts payable. It is not limited to bonds and bank loans.

Suppose Vista reports $1,200,000 of current liabilities, $1,800,000 of noncurrent liabilities, and $5,000,000 of assets. Total liabilities are $3,000,000, so debt to assets is $3,000,000 ÷ $5,000,000 = 60%.

The ratio indicates that liabilities represent 60% of reported asset financing. Higher leverage generally increases financial risk, other factors equal. However, the ratio is not a direct prediction of default, and there is no universal safe percentage for every industry.

Check the definition before comparing sources. Some analysts use “debt” to mean only interest-bearing borrowings. Mixing that narrower numerator with this guide’s total-liabilities measure produces misleading comparisons.

How do you calculate times interest earned?

Times interest earned = (net income + interest expense + income tax expense) ÷ interest expense. The numerator reconstructs earnings before interest and taxes for this simplified example.

Vista reports net income of $360,000, interest expense of $120,000, and income tax expense of $90,000. Coverage is ($360,000 + $120,000 + $90,000) ÷ $120,000 = 4.75 times.

This means the earnings measure is 4.75 times interest expense. It does not mean cash on hand is 4.75 times interest due. Depreciation, working-capital changes, principal maturities, and capital spending can make cash availability differ from earnings.

A ratio below 1 indicates that this earnings measure does not cover interest expense. If interest expense is zero, the formula has a zero denominator and does not provide a meaningful ordinary coverage result.

Interpret the ratios together

Vista’s 60% debt to assets describes leverage at a point in time; 4.75 times interest earned describes earnings coverage over a period. Neither replaces the maturity schedule. Strong interest coverage does not prove that a large principal payment due next month can be funded.

Compare several periods and similar businesses using consistent definitions. Read collateral and covenant disclosures, identify concentrated maturities, and consider off-balance-sheet financing exposures. The notes to financial statements provide context that a single ratio cannot capture.

Common mistakes

  • Leaving next year’s principal payment entirely in noncurrent debt.
  • Using only long-term debt in the total-liabilities ratio.
  • Dividing net income alone by interest expense.
  • Treating interest coverage as cash available for principal repayment.
  • Assuming a low ratio guarantees safety without reviewing covenants and maturities.
  • Netting pledged assets against the related debt instead of reporting both.
  • Thinking a plan to refinance, by itself, keeps a current maturity noncurrent.

Practice questions with explanations

1. A $600,000 loan requires $80,000 principal next year. How is it classified if no exception applies?

Answer: $80,000 current and $520,000 noncurrent. Total debt remains $600,000.

2. Current liabilities are $250,000, noncurrent liabilities $350,000, and assets $1,000,000. What is debt to assets?

Answer: 60%: ($250,000 + $350,000) ÷ $1,000,000. Include both liability categories.

3. Net income is $84,000, taxes $21,000, and interest $15,000. What is times interest earned?

Answer: 8 times: ($84,000 + $21,000 + $15,000) ÷ $15,000. Add back both tax and interest before dividing.

Want more practice like this? The Intermediate Accounting course walks through long-term debt, notes payable, and bonds step by step. You can start with the free sample course first.

Interactive long-term debt disclosure quiz

Check your understanding with four quick questions on pledged assets, fair value disclosure, five-year maturity schedules, and debt covenants. Pick your answers, then select Check my work to see how each one is solved.

Frequently asked questions

Is a current maturity an expense?

No. Classification concerns when principal is due. Interest expense is a separate measurement.

Does disclosed fair value replace carrying amount?

No. Disclosure alone does not elect a different measurement basis.

Can a company have high leverage and strong interest coverage?

Yes. The ratios measure different features. Read both alongside cash flows, maturities, and debt terms.

What does ASC 470 require companies to disclose about debt maturities?

ASC 470-10-50-1 requires the combined total of principal maturities and sinking fund requirements for each of the five years after the latest balance sheet date. Many companies also add a “thereafter” line so the schedule ties to total principal.

Do private companies have to disclose the fair value of long-term debt?

Generally, no. Since ASU 2016-01, entities that are not public business entities don’t have to disclose the fair value of financial instruments measured at amortized cost. Public business entities still must.

What happens to debt classification if a company violates a loan covenant?

If the violation lets the lender demand repayment, the debt is generally current. It can stay noncurrent if the lender waives that right for more than one year (or the operating cycle, if longer), or if it’s probable the company will cure the violation within a grace period.

Does a plan to refinance make a current maturity noncurrent?

Not by itself. The company needs both intent and ability. It shows ability by issuing long-term debt or equity, or by signing a qualifying financing agreement, after year-end but before the financial statements are issued.

Continue learning: Intermediate Accounting course · Farhat Lectures free sample course.

Related lessons

Related Articles

Responses