Bonds Payable: A Simple Guide to Types and Journal Entries
Bonds payable is the liability a company records when it borrows by issuing bonds. It shows the face amount the company must repay at maturity, while interest is paid at the stated rate. If bonds sell above or below face value, a premium or discount account adjusts the liability to its carrying value, the amount reported on the balance sheet.
Once you see that the Bonds Payable account always holds the face amount, issuance entries get much easier. Start with who borrowed the money, what the contract promises, and how much cash the company actually received. This guide covers the issuer’s accounting in Intermediate Accounting Lesson 13.1.
Watch Professor Farhat: Types of Bonds
This short video introduces the types of bonds. Watch it alongside the comparison table below, then use the journal entry examples to practice.
What do bonds payable represent?
A company issues bonds to borrow from investors. Holding a bond makes an investor a creditor, not an owner. Interest is the cost of borrowing; dividends are distributions to shareholders. The SEC’s introduction to corporate bonds explains this debt-versus-equity distinction.
Face value, also called par or principal, is the contractual amount due at maturity. The stated rate, or coupon rate, determines cash interest. The indenture sets out the bond’s terms, payment dates, and other requirements. A fixed-rate coupon stays fixed even when market yields change.
A note payable usually records a loan from one lender, such as a bank. A bond issue splits one large borrowing into smaller units, often $1,000 each, so many investors can buy in.
What Are the Main Types of Bonds?
Bond labels describe different features, so several labels can apply to the same issue.
| Feature | Meaning |
|---|---|
| Secured / unsecured | Secured bonds have pledged collateral; unsecured bonds do not. An unsecured corporate bond may be called a debenture. |
| Mortgage / collateral trust | Security consists of real estate / securities pledged by the issuer. |
| Term / serial | Principal matures on one date / in scheduled installments. |
| Callable | The issuer may redeem the bonds early under the contract. |
| Convertible | The terms permit conversion into another security, commonly shares. |
| Zero-coupon | No periodic coupon is paid; the discount supplies the return through maturity. |
| Revenue | Specified revenues support payment, commonly for public projects. |
| Income | Interest depends on the issuer meeting the contract’s earnings condition. |
| Registered / bearer | Registered bonds are recorded in the owner’s name, and interest is paid to that owner. Bearer (coupon) bonds are not registered; the holder presents coupons to collect interest. |
| Commodity-backed | Repayment is tied to a commodity, such as barrels of oil or ounces of gold, rather than a fixed cash amount. |
For example, a hypothetical bond can be secured, callable, and a term bond at the same time. Those words answer different questions: what supports repayment, whether early redemption is permitted, and when principal comes due.
High-yield, or “junk,” bonds carry higher credit risk, so they pay higher interest. Some textbooks describe junk bonds as unsecured, but in practice high-yield bonds can be secured or unsecured. So do not treat “unsecured” and “high-yield” as the same thing. The SEC provides separate explanations of callable bonds and convertible securities.
How does a company issue bonds?
An investment bank may purchase and resell an issue under a firm commitment, assuming the agreed distribution risk. Under a best-efforts arrangement, it tries to place the securities without guaranteeing the same proceeds. A private placement sells directly to selected investors.
These distribution choices do not change the central entry: identify cash proceeds, the contractual face amount, and any discount or premium. The examples below assume issuance on an interest date and no issuance costs.
Bonds payable journal entries at par, discount, and premium
Hypothetical example: Harbor Manufacturing issues $120,000 of five-year, 8% bonds with semiannual interest. Each coupon is $120,000 × 8% ÷ 2 = $4,800. The table presents three alternative issue prices for the same face amount.
| Issue price | Debits | Credits |
|---|---|---|
| 100: at par | Cash $120,000 | Bonds Payable $120,000 |
| 97: at a discount | Cash $116,400; Discount on Bonds Payable $3,600 | Bonds Payable $120,000 |
| 103: at a premium | Cash $123,600 | Bonds Payable $120,000; Premium on Bonds Payable $3,600 |
A price of 97 means 97% of face value, or $97 for every $100 of face value. For Harbor, that is $120,000 × 97% = $116,400. The discount is a debit valuation account that reduces the liability. The premium is a credit valuation account that increases it. Neither represents sales revenue.
When stated and market rates are equal, a basic bond sells at par. A stated rate below market produces a discount; a stated rate above market produces a premium. Use the existing bond pricing guide to calculate the present values behind these prices.
Exam Tip: Total Interest Expense Over the Bond’s Life
Here is a shortcut that is handy on CPA FAR questions, where bonds fall under the Debt topic in Area II, Select Balance Sheet Accounts. Total interest expense over a bond’s life equals the total cash interest paid, plus the discount or minus the premium.
For Harbor, total cash interest is $4,800 × 10 payments = $48,000.
- Issued at 97: $48,000 + $3,600 discount = $51,600 total interest expense
- Issued at 103: $48,000 minus $3,600 premium = $44,400 total interest expense
A discount makes borrowing more expensive, because the company receives less cash today but still repays the full $120,000. A premium makes borrowing cheaper for the same reason in reverse.
Want to keep going? The Intermediate Accounting course picks up from here with the rest of the bond lessons.
What happens after issuance?
For the par alternative, the first full coupon payment debits Interest Expense $4,800 and credits Cash $4,800. If a reporting date arrives before payment, credit Interest Payable for the accrued coupon instead of Cash.
Discounts and premiums make interest expense differ from cash interest. The effective interest method allocates that difference over the bond’s life. Under U.S. GAAP (ASC 835-30), the effective interest method is the required approach, although the straight-line method is allowed when the results are not materially different. For ordinary amortized-cost accounting, later changes in market price do not automatically change the issuer’s recorded liability.
Net carrying amount equals face value minus unamortized discount, plus unamortized premium, minus unamortized issuance costs. FASB’s debt issuance cost amendments to ASC 835-30 explain the presentation of these adjustments. Accrued coupon interest is a separate payable.
If the issue date falls between coupon dates, use the separate bonds issued between interest dates guide. Total cash then includes accrued interest as well as the bond price.
How Are Bonds Payable Shown on the Balance Sheet?
Using the discount alternative for Harbor Manufacturing, the liabilities section on the issue date would show:
| Bonds payable | $120,000 |
| Less: Discount on bonds payable | (3,600) |
| Carrying amount | $116,400 |
For the premium alternative, you would add the $3,600 premium instead, for a carrying amount of $123,600.
Bonds payable are usually a long-term (noncurrent) liability. The part due within one year of the balance sheet date, or within the operating cycle if that is longer, is generally reported as a current liability. One exception under ASC 470-10: a company can keep that debt noncurrent if it intends to refinance it on a long-term basis and can show it is able to, for example by issuing new long-term debt before the financial statements are issued or available to be issued. For serial bonds, only the installment due within the year is current.
Common mistakes to avoid
- Recording Bonds Payable at the cash proceeds rather than face value when using separate valuation accounts.
- Calculating the coupon from carrying amount rather than face value.
- Calling a discount an asset because it has a debit balance.
- Assuming a premium increases the contractual principal due at maturity.
- Using the full annual rate for a semiannual payment. A $120,000, 8% bond pays $4,800 every six months, not $9,600.
Key Takeaways
- Bonds payable is a liability recorded at face value, and bondholders are creditors, not owners.
- Cash interest equals face value × stated rate × the fraction of the year covered.
- Bond prices are quoted as a percentage of face value, so a price of 97 means 97%.
- A stated rate below the market rate creates a discount. A stated rate above the market rate creates a premium.
- Carrying value equals face value minus unamortized discount, plus unamortized premium, minus unamortized issuance costs.
- Discounts and premiums are amortized to interest expense, normally using the effective interest method.
- Bonds payable are usually noncurrent, but the portion due within a year is generally current.
Three practice questions with explanations
1. Interpret the issue price
A hypothetical company issues $200,000 of bonds at 98. What are cash proceeds and the discount?
Answer: Cash is $196,000; the discount is $4,000. Multiply face value by 98%, then subtract proceeds from face value.
2. Calculate the coupon
A $90,000 bond carries a 6% annual coupon paid semiannually. How much is each payment?
Answer: $2,700: $90,000 × 6% ÷ 2. The market yield is unnecessary for this cash calculation.
3. Classify the terms
A bond matures in annual principal installments and permits the issuer to redeem it earlier. Which labels apply?
Answer: Serial and callable. Installments describe maturity; the redemption option describes the issuer’s contractual right.
Test yourself with the bonds payable practice quiz
Ready to check what you learned? This short quiz covers why companies issue bonds in smaller units, what a bond indenture specifies, why a bondholder is a creditor, and what the issuer repays at maturity. Pick an answer for each question, then review the explanation.
Frequently asked questions
Are bonds payable assets or liabilities?
They are liabilities of the issuer. The holder reports an investment, subject to its own accounting rules.
Is a bond discount a loss on the issue date?
For the basic borrowing described here, it is a liability adjustment allocated to interest expense over time, not an immediate operating loss.
Does the bondholder own the company?
Holding a bond alone creates a creditor relationship. A convertible bond may become equity if conversion occurs under its terms.
Are Bonds Payable a Current or Long-Term Liability?
Usually long-term. The portion due within one year of the balance sheet date, or within the operating cycle if longer, is generally a current liability, unless the company refinances it on a long-term basis as ASC 470-10 allows.
What Is the Difference Between the Stated Rate and the Market Rate?
The stated rate, also called the coupon rate, sets the cash interest paid. The market rate, also called the effective rate or yield, is the return investors demand. It sets the bond’s price and the interest expense the issuer records.
Why Would Investors Pay a Premium for a Bond?
Because the bond’s stated rate is higher than the market rate. Investors pay extra up front in exchange for coupon payments that are larger than similar bonds pay. The issuer amortizes the premium, which lowers interest expense over the bond’s life.
How Are Bond Issuance Costs Reported?
Under U.S. GAAP, debt issuance costs are subtracted directly from the bond’s carrying amount, just like a discount, and are amortized to interest expense over the bond’s life. FASB made this change in ASU 2015-03.
What Does It Mean When Bonds Are Issued at 97?
It means the bonds sold for 97% of face value. A $120,000 issue at 97 brings in $116,400 in cash, and the $3,600 difference is recorded as a discount on bonds payable.
Continue learning: Intermediate Accounting course · Farhat Lectures free sample course.
Responses